Na'urar bushewa mai sauri ta atomatik
- Sensor:
- Ee
- Takaddun shaida:
- CE, 3C ISO9001
- Wutar (W):
- 1800
- Voltage (V):
- 220
- Sunan Alama:
- YUNBOSHI
- Lambar Samfura:
- Saukewa: YBS-9025
- Wurin Asalin:
- Jiangsu, China (Mainland)
- Sunan samfur:
- Na'urar bushewa mai sauri ta atomatik
- Abu:
- ABS
- Lokacin bushewa:
- 5-7s
- Tabbacin Fasa Ruwa:
- 1PX4
- Samfura:
- Saukewa: YBS-9025
- Launi:
- ja baki sliver fari
- Siffa:
- Eco-friendly
- Wutar lantarki:
- 220
- Motoci:
- Motar Brushless
- Girma:
- W300*D220*H687MM
- Ikon bayarwa:
- Yanki/Kashi 1000 a kowane wata
- Cikakkun bayanai
- plywood
- Port
- Shanghai
Na'urar busar da hannu tare da kayan ABS
Na'urar busar da hannuƘayyadaddun bayanai
| Model No. | Saukewa: YBS-A380 |
| Lokacin aiki na lokaci ɗaya | ≤50 seconds. |
| Yanayin zafi da aka daidaita ta atomatik | 35°c |
| Gudun iska | 90m/s |
| Lokacin bushewa | 5-7 seconds |
| Ƙarfin tunani | 0.8l |
| Girman gabaɗaya | 650*300*190(mm) |
| Girman tattarawa na waje | 710*360*280(mm) |
| Tushen wutan lantarki | 110V ~ 220-240V ~ 50/60HZ |
| Ƙarfin wutar lantarki | 1800W (800W don injin da 1000W don dumama) |
Na'urar busar da hannu Siffar
- Yana da ƙarfin iska mai ƙarfi don bushe hannaye da sauri a cikin daƙiƙa 5-7, lokacin bushewar sa shine 1/4 zuwa na'urar busar da hannu ta gabaɗaya.
- A tsaye yana bushewa hannun, bangarorin biyu suna hura, banda haka, mai karɓar ruwa kuma yana da kayan aiki don guje wa jike ƙasa.
- Gina-in jerin rauni motor, barga yi.
- Yana da kariyar multifunctional zuwa matsanancin zafin jiki, ƙarin lokaci mai tsawo da babban halin yanzu, yana da aminci don amfani.
- Yana da kyakkyawan aiki tare da fasahar sarrafa guntu da firikwensin infrared.
- Ana amfani da robobin injiniyan da aka shigo da su don tabbatar da ƙarfi da tsayin daka.
- Wurare masu dacewa: irin su otal-otal na taurari, manyan gine-ginen ofis, gidajen cin abinci, shuke-shuke, asibitoci, wuraren motsa jiki, wasiku da filayen jirgin sama.
Na'urar busar da hannuShiryawa
Na'urar busar da hannuJirgin ruwa
Muna garanti
- Saurin isarwa
- Sanarwa da taimako ma'aikata
- Injiniya mai inganci
- Sama da shekaru 10 na ƙwarewar masana'antu
- OEM&ODM karba
Bayanin kamfani
Kamfaninmu ya ƙware a masana'antar bushewar hukuma, tanda bushewa, dehumidifier, majalisar tsaro, ɗakin gwaji da samfuran dehumidifying masu alaƙa.
An fara wannan sana’ar ne a shekarar 2004. Bayan fadada kasuwancin kamfanin, wato YUNBOSHI, an kafa sabon kamfani.
Samfuran mu masu sauƙi ne, masu aminci, masu sauƙin amfani, kuma suna da tasiri sosai wajen kare kowane irin abubuwa. Dubban abokan ciniki da suka gamsu sun rubuta mana don nuna gamsuwarsu da mafi ƙarancin farashi na magance matsalolin danshi.
A: iya. za mu iya OEM da na'urar busar da hannu bisa ga bukata, amma da yawa bukatar up 100pcs.
2.Q: Ta yayadon share magudanar ruwa?
A:Zuba ruwan 200cc a cikin ramin shayewa sannan a ciro tankin magudanar sannan a wanke.
3.Q: Yadda za a maye gurbin aromatic?
A:Cire tankin magudanar ruwa da farko sannan a buɗe murfin, sannan a maye gurbin sabon kamshin, bayan maye gurbin, saka shi baya.
4.Q: Tare da na'urar bushewa da yawa daga abin da za a zaɓa, ta yaya zan ɗauki na'urar bushewa wanda ya dace da ni?
A:Ya kamata a yi la'akari da abubuwa da yawa, irin su: saurin iska, lokacin bushewa da kuma daidaita zafin jiki ta atomatik .Menene mafi kyawun ƙira da ƙananan iko ya kamata a haɗa su.
5.Q: Yaya kuke shirya shi?
A: Muna amfani da jakar kumfa + kumfa + akwatin ciki mai tsaka tsaki, zai yi ƙarfi sosai yayin jigilar kaya.
