China is hands-down the manufacturing Mecca for a PC hardware nerd like me. So when I had the opportunity to see the magic happening first-hand I immediately packed a bag and travelled the 6,000-odd miles from the Shire-like West of England to the smog-choked Mordor of Dongguan in China to see just how such technical wonders are created.

There was expired baby juice on retail area shelving; the bacon in the deli-case was not covered or re-wrapped after use; there was uncovered steak meat in the chest freezer; the slicer had an accumulation of food residue on the food contact surfaces and is not being washed, rinsed and sanitized at least every four hours; commercially processed ready-to-eat deli meats, located in the display case, were not marked with the date they were opened; the food safety certified person was not present; soap was not available at the handwash sink in the rear prep area; the handwash sinks in the rear prep and toilet room areas did not have single use towels, continuous towels, or air drying device; food employees were not wearing or wearing ineffective hair restraints, such as nets, hats, or beard restraints; cutting boards had deep scratches and scoring that did not allowing for effective cleaning and sanitizing; there was ice accumulation on the chest freezer in the retail area and the chest freezer and reach-in freezer in the food prep area; the refrigeration unit condensation lines was draining onto the basement floor.

As Chairman of Claroty’s Board of Advisors, Rogers will lead a distinguished cadre of business and security leaders to provide guidance and...

Since it is unlikely that you will be able to find recycled glass and screens of the exact size specified in these plans, you will need to adapt this design to what you have. Resize the width and depth of the dryer cabinet to fit your two screens. Then add trim or plywood to the top of the cabinet to make it fit your glass. Try to adhere to all the vertical measurements outlined here, especially for internal components and vent areas.

This is an expensive set, there's no way to avoid the obvious. But as these innovative containers can help preserve produce for multiple days longer than typical food storage systems, over time they'll compensate for their high price tag in reduced food waste.

• The Bent Nail, 5217 98th St., Ste. 900: observed soiled kitchen utensils. Observed improper employee hand washing. Observed several expired items available for consumption. Observed improper storage of toxic items. Observed improper storage of bulk spice rub. Observed personal employee items stored in dish-sanitation area. Corrected on site.

No one can name specific educational backgrounds required for organizing a food spot. Even those who have no professional education

©2019 American Association for the Advancement of Science. All rights Reserved. AAAS is a partner of HINARI, AGORA, OARE, CHORUS, CLOCKSS, CrossRef and COUNTER.Science Advances ISSN 2375-2548.

White nails and all versions of nearly-blank have been a major trend for the last few seasons, and Sally Hansen Miracle Gel in Get Mod is a bestselling drugstore beauty product partially because it’s the perfect shade of crisp white, but mostly because it’s a gel-formula polish that dries fast and requires no UV light time. Find out the nail polish colors every woman should own.

Dispersing 5 weight % (wt %) white silicone (Reynolds Advanced Materials, IL, USA) into a transparent PDMS precursor (10:1; SYLGARD 184) yielded a thick liquid cast onto the mold by spin coating at 200 rpm. Curing at 70°C for 1 hour yielded a 700-μm-thick, soft, white microfluidic structure. A mechanical punch tool defined 1-mm-diameter inlet holes for the colorimetric channels and ellipsoidal inlet holes for the electrochemical chambers. Pouring PDMS (10:1) on a PMMA-coated silicon wafer, then spin-casting at 400 rpm, and curing at 70°C for 1 hour produced a uniform, 200-μm-thick slab as a cap for the microfluidic platform. An additional layer of PDMS (60:1) spin-casted at 1000 rpm and cured for another 1 hour at 70°C formed a thin, tacky coating. Separately, a commercial laser printer (Konica Minolta C454 PS Color, Tokyo, Japan) printed color reference markers on a 25-μm-thick polyester (PET) film (FLX000464; FLEXcon, MA, USA), and a CO2 laser (Universal Laser Systems, AZ, USA) defined sweat inlet holes in a skin-adhesive membrane (PC2723U, Scapa Healthcare). Assembly of the microfluidic patch involved placing the colorimetric assays, electrochemical sensors, and neodymium magnets (D0105 Nickel; SuperMagnetMan, AL, USA) into their respective chambers and then laminating the sticky side of the capping layer onto the top of the microfluidic patch. Plasma treating a skin-adhesive membrane, the color reference marker film, and the microfluidic platform with a handheld corona generator yielded hydrophilic surfaces that allowed efficient bonding of the stack to complete the fabrication.

Call me crazy but some of this seems sensible — not just because 3,500 regular and reserve forces have been readied for no-deal deployment. Cod psychology (abundant even in the face of punitive post-Brexit fishing quotas) suggests compartmentalising the problems that overwhelm you, shrinking them down, tackling them in bitesize form. 

Earlier this month, NIST and NRC Canada distributed 29 of the 60 masses, one to each of the participating South and Central American countries. The remaining artifacts will be kept and monitored by NIST and NRC Canada until the study is complete.